Seed osmopriming with polyethylene glycol (PEG) enhances seed germination and seedling physiological traits of Coronilla varia L. under water stress.

Water stress can adversely affect seed germination and plant growth. Seed osmopriming is a pre-sowing treatment in which seeds are soaked in osmotic solutions to undergo the first stage of germination prior to radicle protrusion. Seed osmopriming enhances germination performance under stressful environmental conditions, making it an effective method to improve plant resistance and yield. This study analyzed the effect of seed osmopriming with polyethylene glycol (PEG) on seed germination and physiological parameters of Coronilla varia L. Priming treatments using 10% to 30% PEG enhanced germination percentage, germination vigor, germination index, vitality index, and seedling mass and reduced the time to reach 50% germination (T50). The PEG concentration that led to better results was 10%. The content of soluble proteins (SP), proline (Pro), soluble sugars (SS), and malondialdehyde (MDA) in Coronilla varia L. seedlings increased with the severity of water stress. In addition, under water stress, electrolyte leakage rose, and peroxidase (POD) and superoxide dismutase (SOD) activities intensified, while catalase (CAT) activity increased at mild-to-moderate water stress but declined with more severe deficiency. The 10% PEG priming significantly improved germination percentage, germination vigor, germination index, vitality index, and time to 50% germination (T50) under water stress. Across the water stress gradient here tested (8 to 12% PEG), seed priming enhanced SP content, Pro content, and SOD activity in Coronilla varia L. seedlings compared to the unprimed treatments. Under 10% PEG-induced water stress, primed seedlings displayed a significantly lower MDA content and electrolyte leakage than their unprimed counterparts and exhibited significantly higher CAT and POD activities. However, under 12% PEG-induced water stress, differences in electrolyte leakage, CAT activity, and POD activity between primed and unprimed treatments were not significant. These findings suggest that PEG priming enhances the osmotic regulation and antioxidant capacity of Coronilla varia seedlings, facilitating seed germination and seedling growth and alleviating drought stress damage, albeit with reduced efficacy under severe water deficiency.

Enzyme-Triggered Polyelectrolyte Complex for Responsive Delivery of α-Helical Polypeptides to Optimize Antibacterial Therapy.

Responsive nanomaterials hold significant promise in the treatment of bacterial infections by recognizing internal or external stimuli to achieve stimuli-responsive behavior. In this study, we present an enzyme-responsive polyelectrolyte complex micelles (PTPMN) with α-helical cationic polypeptide as a coacervate-core for the treatment of Escherichia coli (E. coli) infection. The complex was constructed through electrostatic interaction between cationic poly(glutamic acid) derivatives and phosphorylation-modified poly(ethylene glycol)-b-poly(tyrosine) (PEG-b-PPTyr) by directly dissolving them in aqueous solution. The cationic polypeptide adopted α-helical structure and demonstrated excellent broad-spectrum antibacterial activity against both Gram-negative and Gram-positive bacteria, with a minimum inhibitory concentration (MIC) as low as 12.5 µg mL-1 against E. coli. By complexing with anionic PEG-b-PPTyr, the obtained complex formed ß-sheet structures and exhibited good biocompatibility and low hemolysis. When incubated in a bacterial environment, the complex cleaved its phosphate groups triggered by phosphatases secreted by bacteria, exposing the highly α-helical conformation and restoring its effective bactericidal ability. In vivo experiments confirmed accelerated healing in E. coli-infected wounds.

Protecting Orthopaedic Implants from Infection: Antimicrobial Peptide Mel4 Is Non-Toxic to Bone Cells and Reduces Bacterial Colonisation When Bound to Plasma Ion-Implanted 3D-Printed PAEK Polymers.

Even with the best infection control protocols in place, the risk of a hospital-acquired infection of the surface of an implanted device remains significant. A bacterial biofilm can form and has the potential to escape the host immune system and develop resistance to conventional antibiotics, ultimately causing the implant to fail, seriously impacting patient well-being. Here, we demonstrate a 4 log reduction in the infection rate by the common pathogen S. aureus of 3D-printed polyaryl ether ketone (PAEK) polymeric surfaces by covalently binding the antimicrobial peptide Mel4 to the surface using plasma immersion ion implantation (PIII) treatment. The surfaces with added texture created by 3D-printed processes such as fused deposition-modelled polyether ether ketone (PEEK) and selective laser-sintered polyether ketone (PEK) can be equally well protected as conventionally manufactured materials. Unbound Mel4 in solution at relevant concentrations is non-cytotoxic to osteoblastic cell line Saos-2. Mel4 in combination with PIII aids Saos-2 cells to attach to the surface, increasing the adhesion by 88% compared to untreated materials without Mel4. A reduction in mineralisation on the Mel4-containing surfaces relative to surfaces without peptide was found, attributed to the acellular portion of mineral deposition.

Chemical Modifications to Enhance the Drug Properties of a VIP Receptor Antagonist (ANT) Peptide.

Antagonist peptides (ANTs) of vasoactive intestinal polypeptide receptors (VIP-Rs) are shown to enhance T cell activation and proliferation in vitro, as well as improving T cell-dependent anti-tumor response in acute myeloid leukemia (AML) murine models. However, peptide therapeutics often suffer from poor metabolic stability and exhibit a short half-life/fast elimination in vivo. In this study, we describe efforts to enhance the drug properties of ANTs via chemical modifications. The lead antagonist (ANT308) is derivatized with the following modifications: N-terminus acetylation, peptide stapling, and PEGylation. Acetylated ANT308 exhibits diminished T cell activation in vitro, indicating that N-terminus conservation is critical for antagonist activity. The replacement of residues 13 and 17 with cysteine to accommodate a chemical staple results in diminished survival using the modified peptide to treat mice with AML. However, the incorporation of the constraint increases survival and reduces tumor burden relative to its unstapled counterpart. Notably, PEGylation has a significant positive effect, with fewer doses of PEGylated ANT308 needed to achieve comparable overall survival and tumor burden in leukemic mice dosed with the parenteral ANT308 peptide, suggesting that polyethylene glycol (PEG) incorporation enhances longevity, and thus the antagonist activity of ANT308.

The Long-Acting Serine Protease Inhibitor mPEG-SPA-MDSPI16 Alleviates LPS-Induced Acute Lung Injury.

Anti-inflammatory drugs have become the second-largest class of common drugs after anti-infective drugs in animal clinical care worldwide and are often combined with other drugs to treat fever and viral diseases caused by various factors. In our previous study, a novel serine protease inhibitor-encoding gene (MDSPI16) with improved anti-inflammatory activity was selected from a constructed suppressive subducted hybridization library of housefly larvae. This protein could easily induce an immune response in animals and had a short half-life, which limited its wide application in the clinic. Thus, in this study, mPEG-succinimidyl propionate (mPEG-SPA, Mw = 5 kDa) was used to molecularly modify the MDSPI16 protein, and the modified product mPEG-SPA-MDSPI16, which strongly inhibited elastase production, was purified. It had good stability and safety, low immunogenicity, and a long half-life, and the IC50 for elastase was 86 nM. mPEG-SPA-MDSPI16 effectively inhibited the expression of neutrophil elastase and decreased ROS levels. Moreover, mPEG-SPA-MDSPI16 exerted anti-inflammatory effects by inhibiting activation of the NF-κB signaling pathway and the MAPK signaling pathway in neutrophils. It also exerted therapeutic effects on a lipopolysaccharide (LPS)-induced acute lung injury (ALI) mouse model. In summary, mPEG-SPA-MDSPI16 is a novel anti-inflammatory protein modified with PEG that has the advantages of safety, nontoxicity, improved stability, and strong anti-inflammatory activity in vivo and in vitro and is expected to become an effective anti-inflammatory drug.

Anticancer potential of thiocolchicoside and lauric acid loaded chitosan nanogel against oral cancer cell lines: a comprehensive study.

The present study explored the anticancer activity of a Chitosan-based nanogel incorporating thiocolchicoside and lauric acid (CTL) against oral cancer cell lines (KB-1). Cell viability, AO/EtBr dual staining and Cell cycle analysis were done to evaluate the impact of CTL nanogel on oral cancer cells. Real-time PCR was performed to analyze proapoptotic and antiapoptotic gene expression in CTL-treated KB-1 cells. Further, molecular docking analysis was conducted to explore the interaction of our key ingredient, thiocolchicoside and its binding affinities. The CTL nanogel demonstrated potent anticancer activity by inhibiting oral cancer cell proliferation and inducing cell cycle arrest in cancer cells. Gene expression analysis indicated alterations in Bax and Bcl-2 genes; CTL nanogel treatment increased Bax mRNA expression and inhibited the Bcl-2 mRNA expression, which showed potential mechanisms of the CTL nanogel's anticancer action. It was found that thiocolchicoside can stabilize the protein's function or restore it as a tumour suppressor. The CTL nanogel exhibited excellent cytotoxicity and potent anticancer effects, making it a potential candidate for non-toxic chemotherapy in cancer nanomedicine. Furthermore, the nanogel's ability to modulate proapoptotic gene expression highlights its potential for targeted cancer therapy. This research contributes to the growing interest in Chitosan-based nanogels and their potential applications in cancer treatment.

Eco-friendly green synthesis of N­pyrazole amino chitosan using PEG-400 as an anticancer agent against gastric cancer cells via inhibiting EGFR.

The present study was conducted to develop a green process that provides access to the development of Schiff base derivatives of chitosan with the heterocyclic moiety as a novel class of anti-gastric cancer agent. In the present study, we have synthesized these derivatives by reacting various pyrazoles with chitosan using CAN in PEG400. The compounds were synthesized in 20 min in excellent yield by using CAN at 5% in PEG400 at 80°C in the shortest reaction time of 20 min. The PEG400 could be efficiently recycled for the three consecutive runs. The developed compounds were tested for EGFR-TK inhibition using a Kinase-Glo Plus luminescence kinase assay kit where they exhibited significant activity revealing compound 2d as the most potent analog, while other compounds showed mild to moderate inhibitory activity. MTT assay was conducted to determine the effect of the three most potent EGFR inhibitors (2b, 2c, and 2d) on the proliferation of gastric cancer cells (SGC-7901). The results showed compound 2d as the most potent anticancer agent against SGC7901 cells. The effect of compound 2d was also quantified on the apoptosis and cell phase of SGC7901 cells using flow cytometry assay at various concentrations ranging from 0, 10, 20, and 30 µM. Results suggest that compound 2d showed significant inhibition of SGC-7901 by inducing apoptosis and arresting G0/G1 cell phase. The western blot analysis also revealed that compound 2d significantly inhibited the overexpression of EGFR in SGC-7901 cells. The study successfully demonstrated the development of N­pyrazole amino chitosan as a novel class of agent against gastric cancer via inhibition of EGFR.

Impact of PEG sensitization on the efficacy of PEG hydrogel-mediated tissue engineering.

While poly(ethylene glycol) (PEG) hydrogels are generally regarded as biologically inert blank slates, concerns over PEG immunogenicity are growing, and the implications for tissue engineering are unknown. Here, we investigate these implications by immunizing mice against PEG to stimulate anti-PEG antibody production and evaluating bone defect regeneration after treatment with bone morphogenetic protein-2-loaded PEG hydrogels. Quantitative analysis reveals that PEG sensitization increases bone formation compared to naive controls, whereas histological analysis shows that PEG sensitization induces an abnormally porous bone morphology at the defect site, particularly in males. Furthermore, immune cell recruitment is higher in PEG-sensitized mice administered the PEG-based treatment than their naive counterparts. Interestingly, naive controls that were administered a PEG-based treatment also develop anti-PEG antibodies. Sex differences in bone formation and immune cell recruitment are also apparent. Overall, these findings indicate that anti-PEG immune responses can impact tissue engineering efficacy and highlight the need for further investigation.

A nanomedicine composed of polymer-ss-DOX and polymer-Ce6 prodrugs with monoclonal antibody targeting effect for anti-tumor chemo-photodynamic synergetic therapy.

Anticancer drugs used for systemic chemotherapy often exhibit off-target toxicity and uncontrolled drug release due to their lack of targeting. To improve the bioavailability of drugs and reduce side effects, we have developed a mixed micelle of nanomedicine composed of two prodrugs with surface modified monoclonal antibody for cancer therapy. In this system, Nimotuzumab was used as targeting ligands of the mixed micelles (named as DCMMs) that is composed of polymer-doxorubicin prodrug (abbreviated as PEG-b-P(GMA-ss-DOX)) and maleimide polyethylene glycol-chlorin e6 (abbreviated as Mal-PEG-Ce6). The mixed micelles modified with Nimotuzumab (named as NTZ-DCMMs) bind to overexpressed EGFR receptors on Hepatoma-22 (H22) cells. Disulfide bonds in PEG-b-P(GMA-ss-DOX) are disrupted in tumor microenvironment, inducing the reduction-responsive release of DOX and leading to tumor cell apoptosis. Simultaneously, Chlorin e6 (Ce6) produced plenty of singlet oxygen (1O2) under laser irradiation to kill tumor cells. In vivo biological distribution and antineoplastic effect experiments demonstrate that NTZ-DCMMs enhanced drug enrichment at tumor sites through targeting function of antibody, dramatically suppressing tumor growth and mitigating cardiotoxicity of drugs. All results prove that NTZ-DCMMs have the ability to actively target H22 cells and quickly respond to tumor microenvironment, which is expected to become an intelligent and multifunctional drug delivery carrier for efficient chemotherapy and photodynamic therapy of hepatoma. STATEMENT OF SIGNIFICANCE: Anticancer drugs used for systemic chemotherapy often exhibit off-target toxicity due to their lack of targeting. Therefore, it's necessary to develop effective, targeted, and collaborative treatment strategies. We construct a mixed micelle of nanomedicine based on two polymer prodrugs and modified with monoclonal antibody on surface for cancer therapy. Under the tumor cell microenvironment, the disulfide bonds of polymer-ss-DOX were broken, effectively triggering DOX release. The photosensitizer Ce6 could generate a large amount of ROS under light, which synergistically promotes tumor cell apoptosis. By coupling antibodies to the hydrophilic segments of polymer micelles, drugs can be specifically delivered. Compared with monotherapy, the combination of chemotherapy and photodynamic therapy can significantly enhance the therapeutic effect of liver cancer.

Detection of Pre-Existing Antibodies to Polyethylene Glycol and PEGylated Liposomes in Human Serum.

Polyethylene glycol, or PEG, is common in consumer products, over-the-counter medications, food, and pharmaceutical products. Concerns about PEG immunogenicity and the subsequent negative impact of pre-existing and product-induced antibodies often shadow the benefits of using PEG in nanotechnology-based products. Such anti-PEG antibodies contribute to the accelerated blood clearance of PEGylated nanomedicines and result in premature drug release and antibody-mediated toxicities. Recent data demonstrated that using PEG in COVID-19 lipid nanoparticle-mRNA vaccines is associated with an induction of anti-PEG antibodies in healthy individuals, further contributing to the development or boosting of pre-existing antibodies and increasing the risks of antibody-mediated toxicities to other products containing PEG. Therefore, monitoring the levels of pre-existing and product-induced anti-PEG antibodies provides mechanistic insights for pharmacology, toxicology, and immunological studies of PEGylated drug products.

Free PEG Suppresses Anaphylaxis to PEGylated Nanomedicine in Swine.

Covalent conjugation of poly(ethylene glycol) (PEG) is frequently employed to enhance the pharmacokinetics and biodistribution of various protein and nanoparticle therapeutics. Unfortunately, some PEGylated drugs can induce elevated levels of antibodies that can bind PEG, i.e., anti-PEG antibodies (APA), in some patients. APA in turn can reduce the efficacy and increase the risks of allergic reactions, including anaphylaxis. There is currently no intervention available in the clinic that specifically mitigates allergic reactions to PEGylated drugs without the use of broad immunosuppression. We previously showed that infusion of high molecular weight free PEG could safely and effectively suppress the induction of APA in mice and restore prolonged circulation of various PEGylated therapeutics. Here, we explored the effectiveness of free PEG as a prophylaxis against anaphylaxis induced by PEG-specific allergic reactions in swine. Injection of PEG-liposomes (PL) resulted in anaphylactoid shock (pseudoanaphylaxis) within 1-3 min in both naïve and PL-sensitized swine. In contrast, repeated injection of free PEG alone did not result in allergic reactions, and injection of free PEG effectively suppressed allergic reactions to PL, including in previously PL-sensitized swine. These results strongly support the further investigation of free PEG for reducing APA and allergic responses to PEGylated therapeutics.

Fast skin healing chitosan/PEO hydrogels: In vitro and in vivo studies.

Due to its outstanding qualities, particularly when it takes the shape of hydrogels, chitosan is a well-known biological macromolecule with many applications. When chitosan hydrogels are modified with other polymers, the desirable function as skin regeneration hydrogels is compromised; nevertheless, the mechanical properties can be improved, which is crucial for commercialization. In this study, for the first time, bimetallic zinc silver metal-organic frameworks (ZAg MOF) loaded with ascorbic acid were added to chitosan/polyethylene oxide (PEO) based interpenetrating polymer network (IPN) hydrogels that were crosslinked with biotin to improve their antimicrobial activity, mechanical characteristics, and sustainable treatment of wounds. Significant changes in the microstructure, hydrophilicity level, and mechanical properties were noticed. Ascorbic acid release patterns were upregulated in an acidic environment pH (5.5) that mimics the initial wound pH. Impressive cell viability (98 %), antimicrobial properties, and almost full skin healing in a short time were achieved for the non-replaceable chitosan/PEO developed hydrogels. Enhancing the wound healing of the treated animals using the prepared CS/PEO hydrogel dressing was found to be a result of the inhibition of dermal inflammation via decreasing IL-1ß, suppressing ECM degradation (MMP9), stimulating proliferation through upregulation of TGF-ß and increasing ECM synthesis as it elevates collagen 1 and α-SMA contents. The findings support the implementation of developed hydrogels as antimicrobial hydrogels dressing for fast skin regeneration.

Withaferin A-Encapsulated PEGylated Nanoliposomes Induce Apoptosis in B16F10 Melanoma Cells by Regulating Bcl2 and Bcl xl Genes and Mitigates Murine Solid Tumor Development.

Withaferin A (WA) is a natural steroidal lactone with promising pharmacological activities, but its poor solubility and bioavailability hinder its clinical application. The liposomal drug delivery system has attracted considerable attention to overcome the delivery limitations of pharmacological agents. The present study investigated the effect of WA-loaded pegylated nanoliposomes (LWA) on in vitro and in vivo B16F10 melanoma tumor models. In vitro results showed that LWA had significantly (P < 0.01) higher cytotoxicity than free WA and induced ROS-mediated apoptosis in B16F10 cells. Transwell cell migration and invasion studies demonstrated that LWA treatment significantly (P < 0.01) decreased the migratory and invasive capacities of melanoma cells compared with WA. In vivo study revealed that treatment significantly (P < 0.01) reduced tumor growth in experimental animals compared with WA or tumor control. Also, LWA administration remarkably inhibited tumor cell proliferation by downregulating the expression of Ki-67 and Cyclin D1 and induced apoptosis by regulating the expression of Bax, Bcl2, and Bcl xl levels. Our results strongly suggest that LWA could be a promising therapeutic formulation for treating malignant melanoma.

Simultaneous Regulation of the Mechanical/Osteogenic Capacity of Brushite Calcium Phosphate Cement by Incorporating with Poly(ethylene glycol) Dicarboxylic Acid.

Brushite calcium phosphate cement (brushite CPC) is a prospective bone repair material due to its ideal resorption rates in vivo. However, the undesirable mechanical property and bioactivity limited its availability in clinic application. To address this issue, incorporating polymeric additives has emerged as a viable solution. In this study, poly(ethylene glycol) dicarboxylic acid, PEG(COOH), was synthesized and employed as the polymeric additive. The setting behavior, anti-washout ability, mechanical property, degradation rate, and osteogenic capacity of brushite CPC were regulated by incorporating PEG(COOH). The incorporation of PEG(COOH) with carboxylic acid groups demonstrated a positive effect on both mechanical properties and osteogenic activity in bone repair. This study offers valuable insights and suggests a promising strategy for the development of materials in bone tissue engineering.

Construction of a layer-by-layer self-assembled rosemarinic acid delivery system on the surface of CFRPEEK implants for enhanced anti-inflammatory and osseointegration activities.

Carbon fiber-reinforced polyether ether ketone (CFRPEEK) implants have attracted widespread attention in the field of clinical bone defect repair. However, the surface bioinertness confines the application of CFRPEEK implants. Inspired by the study of rosmarinic acid (RA)-promoted osteogenic differentiation, a self-assembly surface modification method based on electrostatic interactions, involving deposition of sodium carboxymethyl cellulose/chitosan and rosmarinic acid layer by layer on the surface of poly-L-lysine modified hydroxy CFRPEEK (SCPP/CC5@RA), is proposed to introduce RA on the surface of CFRPEEK for bioactivation. After layer-by-layer self-assembly (LBL), the surface of SCPP/CC5@RA exhibits weak electrophoresis (11.43 eV), suitable hydrophilicity, and bioactivity. The results of in vitro studies indicate that the RA release behavior of SCPP/CC5@RA effectively regulates the immune-inflammatory response and promotes the differentiation of osteoblasts. The rapid release of RA (0.17 µg mL-1) in the initial stage can downregulate the secretion of inflammation-related cytokines and significantly reduce oxidative stress levels; the sustained release of RA (0.06 µg mL-1) in the late stage can upregulate the expression of osteogenesis-related genes and induce mineralization of osteoblasts. Moreover, the rabbit tibia defect model demonstrates that the LBL technique can enhance the osseointegration of CFRPEEK implants. Compared with the control group, the bone trabecular thickness of the SCPP/CC5@RA group increases by 1.36 times, and the maximum pushing force increases by 2.67 times. In summary, this study provides a promising LBL based RA delivery system for the development of a dual-functional CFRPEEK implant in the field of bone implant biomaterials.

Adapting the in vitro rumen incubation method to evaluate the effect of a plant extract on the exsheathment inhibition of Haemonchus contortus infective larvae.

This study adapted the in vitro rumen incubation (IVRI) method to evaluate the biological activity of a Gymnopodium floribundum leaves extract against the exsheathment of Haemonchus contortus infective larvae (L3), and to determine the role of plant polyphenols on the biological activity. The incubation protocol followed the IVRI method, adding polyethylene glycol (PEG) as a polyphenol-blocking agent. The L3 were incubated in ruminal liquor (RL), ruminal liquor with PEG (RL+PEG), ruminal liquor with G. floribundum extract (RLE), and ruminal liquor with G. floribundum extract and PEG (RLE+PEG). Incubation condition controls included phosphate buffered saline (PBS), PBS with PEG (PBS+PEG), incubation medium (without ruminal liquor) (IM), and incubation medium with PEG (IM+PEG). The L3 were recovered after incubation times of 0, 1, 3, 6, 9, and 24 h (39 °C). The respective L3 exsheathment kinetics were estimated for the different treatments (RL, RL+PEG, RLE, and RLE+PEG) using Log-Logistic models. The parameters of the different models were compared to determine the impact of the extract, with or without PEG, on the L3 exsheathment kinetics. The exsheathment in PBS and PBS+PEG remained < 2.71% at each incubation time. The exsheathment in IM and IM+PEG reached 13.58% and 17.18% at 24 h, respectively. The exsheathment percentages for RLE were lower than those for RL at 3, 6 and 9 h of incubation. The inflection point, indicating the time required to reach 50% of the maximal exsheathment (T50), was the only parameter that differed between the ruminal liquor models. The T50 in RLE (7.106 h) was higher than the values obtained for RL (5.385 h) and RL+PEG (4.923 h) (99.99% probability of being different). Such delay resulted in a reduction of exsheathment in RLE of 62% at 3 h, 38% at 6 h, and 12% at 9 h, relative to RL values. When PEG was added with the extract (RLE+PEG), the T50 (5.045 h) was similar to that of RL and RL+PEG. The IVRI method was adapted as an in vitro rumen exsheathment test (IVRET). The IVRET showed that H. contortus L3 exposed to G. floribundum extract delayed their exsheathment kinetics at different time points. The exsheathment delay was attributed to the polyphenol content of the extract.

A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating.

OBJECTIVE: Polyetheretherketone (PEEK), a biomaterial with appropriate bone-like mechanical properties and excellent biocompatibility, is widely applied in cranio-maxillofacial and dental applications. However, the lack of antibacterial effect is an essential drawback of PEEK material and might lead to infection and osseointegration issues. This study aims to apply a natural antibacterial agent, totarol coating onto the 3D printed PEEK surface and find an optimized concentration with balanced cytocompatibility, osteogenesis, and antibacterial capability. METHODS: In this study, a natural antibacterial agent, totarol, was applied as a coating to fused filament fabrication (FFF) 3D printed PEEK surfaces at a series of increasing concentrations (1 mg/ml, 5 mg/ml, 10 mg/ml, 15 mg/ml, and 20 mg/ml). The samples were then evaluated for cytocompatibility with L929 fibroblast and SAOS-2 osteoblast using live/dead staining and CCK-8 assay. The antibacterial capability was assessed by crystal violet staining, live/dead staining, and scanning electron microscopy (SEM) utilizing the oral primary colonizer S. gordonii and isolates of mixed oral bacteria in a stirring system simulating the oral environment. The appropriate safe working concentration for totarol coating is selected based on the results of the cytocompatibility and antibacterial test. Subsequently, the influence on osteogenic differentiation was evaluated by alkaline phosphatase (ALP) and alizarin red staining (ARS) analysis of pre-osteoblasts. RESULTS: Our results showed that the optimal concentration of totarol solution for promising antibacterial coating was approximately 10 mg/ml. Such surfaces could play an excellent antibacterial role by inducing a contact-killing effect with an inhibitory effect against biofilm development without affecting the healing of soft and hard tissues around FFF 3D printed PEEK implants or abutments. SIGNIFICANCE: This study indicates that the totarol coated PEEK has an improved antibacterial effect with excellent biocompatibility providing great clinical potential as an orthopedic/dental implant/abutment material.

Deguelin and Paclitaxel Loaded PEG-PCL Nano-Micelles for Suppressing the Proliferation and Inducing Apoptosis of Breast Cancer Cells.

BACKGROUND: Deguelin (DGL) is a natural flavonoid reported to exhibit antitumor effects in breast cancer (BC). PEG-PCL (Polyethylene Glycol- Polycaprolactone), as polymeric micelles, has biodegradability and biocompatibility. The aim of this study was to investigate whether the nanoparticular delivery system, PEG-PCL could improve the bioavailability of DGL for suppressing proliferation of BC cells. METHODS: PEG-PCL polymers were first prepared by ring-opening polymerization, and DGL and paclitaxel (PTX)-loaded PEG-PCL nano-micelles were formulated via the film dispersion method. The composition and molecular weight of PEG-PCL were analyzed by nuclear magnetic resonance and fourier Transform infrared spectroscopy (FTIR) spectra. Particle size, surface potential and hemolytic activity of micelles were assessed by dynamic light scattering, transmission electron microscopy and hemolysis assay, respectively. Then proliferation and apoptosis of MDA-MB-231 and MDA-MB-468 cells were tested with Edu staining, CCK-8, TUNEL staining, and Flow cytometer. Caspase 3 expression was also assessed by Western blot. RESULTS: Our results first indicated that PEG2000-PCL2000 was successfully synthesized. DGL and PTX-loaded PEG-PCL nano-micelles were rounded in shape with a particle size of 35.78 ± 0.35 nm and a surface potential of 2.84 ± 0.27 mV. The micelles had minimal hemolytic activity. Besides, we proved that DGL and PTX-loaded PEG-PCL nano-micelles could suppress proliferation and induce apoptosis in BC cells. The DGL and PTX-loaded PEG-PCL nano-micelles constructed in this study had a prominent inhibitory role on proliferation and a remarkable promotional role on apoptosis in BC cells. CONCLUSIONS: This study proposes that nano-micelles formed by PEG-PCL can enhance the cytotoxicity of Paclitaxel against breast cancer cells, and concurrently, the loading of Deguelin may further inhibit cell proliferation. This presents a potential for the development of a novel therapeutic strategy.

Photo-Responsive Ascorbic Acid-Modified Ag2S-ZnS Heteronanostructure Dropping pH to Trigger Synergistic Antibacterial and Bohr Effects for Accelerating Infected Wound Healing.

Nonantibiotic approaches must be developed to kill pathogenic bacteria and ensure that clinicians have a means to treat wounds that are infected by multidrug-resistant bacteria. This study prepared matchstick-like Ag2S-ZnS heteronanostructures (HNSs). Their hydrophobic surfactants were then replaced with hydrophilic poly(ethylene glycol) (PEG) and thioglycolic acid (TGA) through the ligand exchange method, and this was followed by ascorbic acid (AA) conjugation with TGA through esterification, yielding well-dispersed PEGylated Ag2S-ZnS@TGA-AA HNSs. The ZnS component of the HNSs has innate semiconductivity, enabling the generation of electron-hole pairs upon irradiation with a light of wavelength 320 nm. These separate charges can react with oxygen and water around the HNSs to produce reactive oxygen species. Moreover, some holes can oxidize the surface-grafted AA to produce protons, decreasing the local pH and resulting in the corrosion of Ag2S, which releases silver ions. In evaluation tests, the PEGylated Ag2S-ZnS@TGA-AA had synergistic antibacterial ability and inhibited Gram-negative Escherichia coli and Gram-positive methicillin-resistant Staphylococcus aureus (MRSA). Additionally, MRSA-infected wounds treated with a single dose of PEGylated Ag2S-ZnS@TGA-AA HNSs under light exposure healed significantly more quickly than those not treated, a result attributable to the HNSs' excellent antibacterial and Bohr effects.

Coordinative Double Hydrophilic All-Polyether Micelles for pH-Responsive Delivery of Cisplatin.

Despite its widespread use in the treatment of numerous cancers, the use of cisplatin still raises concerns about its high toxicity and limited selectivity. Consequently, the necessity arises for the development of an effective drug delivery system. Here, we present an effective approach that introduces a double hydrophilic block copolyether for the controlled delivery of cisplatin. Specifically, poly(ethylene glycol)-block-poly(glycidoxy acetic acid) (mPEG-b-PGA) was synthesized via anionic ring-opening polymerization using the oxazoline-based epoxide monomer 4,4-dimethyl-2-oxazoline glycidyl ether, followed by subsequent acidic deprotection. The coordinative metal-ligand interaction between cisplatin and the carboxylate group within the PGA block facilitated the formation of micelles from the double hydrophilic mPEG-b-PGA copolyether. Cisplatin-loaded polymeric micelles had a high loading capacity, controlled pH-responsive release kinetics, and high cell viability. Furthermore, in vitro biological assays revealed cellular apoptosis induced by the cisplatin-loaded micelles. This study thus successfully demonstrates the potential use of double hydrophilic block copolyethers as a versatile platform for biomedical applications.